3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Box of 5) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new h...

3/8" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with 3/4" hose OD or 3/8" hose ID.

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new h...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finishe...

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...

1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on...

Milton® (S-659w) 1/4" NPT Full-Swivel Air Hose End Fitting (Female)  1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers ...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

1/4" MNPT reusable hose end fittings can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" Hose OD or 3/8" hos...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

Milton ® (S-614-4w) 1/4" NPT Brass Compressor Tank Drain Cock  This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on com...

1/4" Male hose end with 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be...

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...