1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

Designed specifically for Milton ® push on and lock on hoses, these 3/8" MNPT brass hose ends fit a 3/8" hose ID. These hose ends require no clamps...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 11/16" OD and a 0.687 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 19/32" OD and a 0.593 ID. Note that rubber hose tolerances var...

This six foot replacement hose is used for Milton® portable air tanks #687 and #688. With a single head air chuck on one side and a 1/4" MNPT hose ...

This 25 foot deluxe heavy duty EPDM rubber hose is designed for tough service station and shop applications. This 2 braid hose is kink resistant an...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Box of 5) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new h...

3/8" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with 3/4" hose OD or 3/8" hose ID.

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

Milton® is expanding its hose reel portfolio to include stainless steel reels. Milton®'s Industrial (Grade 304) stainless steel hose reels are idea...

Milton® is expanding its hose reel portfolio to include stainless steel reels. Milton®'s Industrial (Grade 304) stainless steel hose reels are idea...

Milton® is expanding its hose reel portfolio to include stainless steel reels. Milton®’s Industrial (Grade 304) stainless steel hose reels are idea...

Milton® (S-659w) 1/4" NPT Full-Swivel Air Hose End Fitting (Female)  1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers ...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

1/4" MNPT reusable hose end fittings can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" Hose OD or 3/8" hos...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

Milton ® (S-614-4w) 1/4" NPT Brass Compressor Tank Drain Cock  This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on com...

1/4" Male hose end with 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be...

1/4" OD Straight union fitting tube has nylon push to connect fittings which offers easy installation of air lines - simply push tubing into fittin...

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/4" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...