Compare

You have no items to compare.

Dual Truck Tire Inflator Gauge and Regulator

Part #: 551

UPC: 30937313904

Number of items in this pack: 1

  • Meets OSHA 1910.77 specifications
  • Includes 6" extension
  • Swivel air chuck
  • 10 to 160 pounds per square inch
List:
$249.97

Fill two tires at once with this dual truck tire inflator gauge with regulator. Truck tire inflator has a pressure range of 10 to 160 PSI or 80 to 840 kPa. Includes two 7' hose assemblies with dual lock on chucks, as well as a 6" extension. Inflator gauge comes with a magnified viewing window.

 

INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.

Weight 4.7500
Made in USA Yes
Gauge Type INFLATOR GAUGE with VIEWING WINDOW
Chuck type Dual lock on chuck with 6" extension
Hose length (2) 7' hose assemblies
Manufacturer Milton Industries
Height 3.5
Width 7
Length 7

Product Questions

No Questions