You have no items to compare.

Milton PRO Series Digital Pistol Grip Inflator Gauge - KWIK-CHANGE® Safety Chuck, 36" Hose

Part #: 572D

UPC: 030937323033

Number of items in this pack: 1 Piece

  • ACCURATE: Measures in PSI (0-255), kPa (0-1800), kg/cm2 (0-18), and Bar (0-18). Meets ANSI/ASME B40.1 standards.
  • GAUGE SWIVELS: Reads at any angle, lays flat in your toolbox. Gauge protected by rubber boot.
  • BACKLIT DISPLAY: Auto-on when tire pressure is detected; Auto-off after inactivity to save battery.
  • EASY HANDLING: Durable/ergonomic grip. Quick fine tuning in case you exceed the target pressure.
  • KWIK GRIP SAFETY CHUCK + long 3' hose eliminates crouching/backache when inflating/deflating tires.

Milton 572D PRO Series Digital Pistol Grip Inflator Gauge - KWIK-CHANGE® Safety Chuck, 36" Hose

Optimize your tire pressure accuracy with this digital inflator gauge, made with a LCD screen measuring in increments of 0.1 PSI and back-lit for better measurement reading in dark environments. This gauge swivels, creating a longer hose with the Kwik Grip Safety Chuck and comes with a 3 foot hose. Our digital gauges also come with a 360 degree swivel gauge (head rotates for an easy and comfortable measurement reading) and +/- 1 PSI accuracy across a range of 0-255 PSI. This turns on automatically when it detects pressure and includes an Auto-shut off feature after 15 seconds that saves on battery life. Designed with a rugged and ergonomic handle grip, shock-absorbing rubber boot, and deflate button for overshot tire pressure.

This provides 4 units of measurements: (PSI, Bar, kg/cm2, kPa), compared to the traditional 2 units from an analog gauge. Carbon fiber gauge face appearance with a protective rubber boot to shield against impacts. Comfort molded nylon handle with coating is incredibly durable and ergonomic. Steel inflator trigger with separate brass deflation button for quick fine tuning in case you go past your target pressure. Solid brass fittings throughout provide long-lasting performance, with 1/4" NPT female air inlet (Milton 727 plug is recommended).



Digital Inflator Gauge w/rugged comfort-grip handle
36” Rubber Hose Kwik Grip (“quick grip”) Safety Chuck + deflate button
2 AAA Batteries (already inserted)

Handle: reinforced coated nylon
Trigger: plated steel with PVC grip
Product dimensions (w/o hose): 9.9 x 4.6 x 1.6 (L x W x H)
Hose: 1/4" ID x 36" EPDM rubber w/ brass fittings
Operating temperature: -4 to +140 degrees F (-20 to +60 C)
Air inlet: 1/4" NPT female (Milton 727 plug sold separately)

Assembled in USA
Warranty: 1 year

Weight 2.9000
Made in USA Yes
Gauge Type Digital Tire Pressure Gauge
Auto shut-off Yes
NPT thread size 1/4" Female NPT
Chuck type Kwik Grip Safety Air Chuck
Thread Size 1/4" - 18 NPT
Battery requirement Yes (2) AAA
Hose length 36" Hose
Manufacturer Milton Industries
Height 1.60"
Width 4.60"
Length 9.90"
PSI range 0 to 255 PSI
Material Type Brass
Rubber boot Yes (Protective Rubber Boot for Dial Gauge)
L (Pkg) 14"
W (Pkg) 9.8"
H (Pkg) 1.75"

Product Questions

What kind of batteries does this product require?
Are batteries included?
How do I replace the batteries?
Pull back the rubber boot from the top of the gauge. Open the battery compartment on the back of the gauge and replace old batteries with new. Replace the rubber boot so it fully covers the gauge.
How do I turn on the inflator gauge?
Press the power button (lower left) once OR connect the chuck to a pressurized tire and the gauge will turn on automatically.
How do I turn off the inflator gauge?
Press and hold the power button (lower left) until the screen goes blank OR the gauge will automatically turn off after 15 seconds of inactivity to preserve battery life.
I just got my inflator gauge but it will not turn on, why?
The inflator gauge comes with batteries already installed, but with a plastic tab which prevents the batteries from draining. If you haven't done so already, please pull back the rubber boot and remove the plastic tab. If plastic tab isn't visible or is difficult to pull, open the battery compartment and remove the battery tab. Replace the rubber boot back in place so that it covers the gauge is fully covered.
What are the benefits of this gauge's chuck and hose?
The 572D, 573D, S-574D, S-575D, S-576D, S-577D, S-578D inflator gauges comes with the Kwik Grip Safety Chuck that securely locks onto the tire valve, enabling one handed inflation. The inflator gauge also comes with a three foot rubber hose which allows a more comfortable position at a safer distance.
Does the gauge swivel?
The gauge swivels 360? on the handle to allow easy viewing at any angle, and it also lays flat for storage.